FLAGSHIP FM240CW CHILLER 240000 BTUS 230V COOL ONLY
$15,451.00$22,704.00 (-32%)
All Sheet metal components are laser cut
All sheet metal components are laser cut with aircraft/military quality tolerances in the ten-thousandths of an inch range as depicted here with the skeleton of an air-cooled chiller. Note the PEM nut inserts and numerous stainless steel rivets that result in a very rigid, strong, and exacting structure.
Flagship Marine Units NEVER have condenser Failures
The heart of every marine air conditioner is the condenser—the heat sink to the ocean and the only component the corrosive sea water touches is the inside of the inside tube. Failure of this tube is catastrophic for the entire system. Even extremely corrosive places like the very high salinity of the Red Sea are no problem for Flagship Marine condensers because we use an unusually thick-walled 90/10 CuNi (copper-nickel) tube with particular annealment, hardness, and other characteristics.
Flagship marine 240,000 BTU’S Chiller. These units are specially designed for yachts or boats with independent areas. It features a dry drain pan, Flagship exclusive diagnostic monitors, electrical box, all 316 marine grade stainless steel components, copper-nickel alloy condenser tubes, and more.
Flasgship FM240CW Marine Chiller – 240,000 BTU’S – 230V – Cool Only
All Sheet metal components are laser cut
All sheet metal components are laser cut with aircraft/military quality tolerances in the ten-thousandths of an inch range as depicted here with the skeleton of an air-cooled chiller. Note the PEM nut inserts and numerous stainless steel rivets that result in a very rigid, strong, and exacting structure.
Flagship Marine Units NEVER have condenser Failures
The heart of every marine air conditioner is the condenser—the heat sink to the ocean and the only component the corrosive sea water touches is the inside of the inside tube. Failure of this tube is catastrophic for the entire system. Even extremely corrosive places like the very high salinity of the Red Sea are no problem for Flagship Marine condensers because we use an unusually thick-walled 90/10 CuNi (copper-nickel) tube with particular annealment, hardness, and other characteristics.
Technical Specifications
Model | FM240CW |
BTU’S of Cooling | 240,000 |
Dimensions | 47.5″ L x 26″ W x 24.5″ H |
Amps (Cool) | 35.0@460/3 |
Phase | 1 |
Cycle | 60 Hz |
Weight Lbs/kg | 980/444 |
Reviews
There are no reviews yet.