FLAGSHIP FM36CW CHILLER 36000 BTUS 230V COOL ONLY
$4,788.00$6,840.00 (-30%)
FLAGSHIP FM36CW CHILLER 36000 BTUS 230V COOL ONLY
All sheet metal components are laser cut with aircraft/military quality tolerances in the ten-thousandths of an inch range as
depicted here with the skeleton of an air-cooled chiller. Note the PEM nut inserts and numerous stainless steel rivets that result
in a very rigid, strong, and exacting structure.
FLAGSHIP FM36CW CHILLER 36000 BTUS 230V COOL ONLY
Flagship marine 36,000 BTU’S Chiller. These units are specially designed for yachts or boats with independent areas. It features a dry drain pan, Flagship exclusive diagnostic monitors, electrical box, all 316 marine grade stainless steel components, copper-nickel alloy condenser tubes, and more.
Electric Box
What sets Flagship Marine apart from our competition is our belief in the KISS principle (Keep It Simple, Stupid). This has guided our component selection and design emphasis for many years. We brag that even a child can follow our schematics!
Look at this single compressor chiller electric box. All the components are “over the counter” at a fraction of typical costs in our industry. The most expensive item here is less than $53.00!
Flagship Marine Units NEVER have condenser Failures
The heart of every marine air conditioner is the condenser—the heat sink to the ocean and the only component the corrosive sea water touches is the inside of the inside tube. Failure of this tube is catastrophic for the entire system. Even extremely corrosive places like the very high salinity of the Red Sea are no problem for Flagship Marine condensers because we use an unusually thick-walled 90/10 CuNi (copper-nickel) tube with particular annealment, hardness, and other characteristics.
Technical Specifications
| Model | FM36CW |
| BTU’S of Cooling | 36,000 |
| Dimensions | 25″ L x 15.5″ W x 23″ H |
| Amps (Cool) | 16.4 |
| Phase | 1 |
| Cycle | 60 Hz |
| Weight Lbs/kg | 121 / 55 |
Dimensional Drawings
Reviews
There are no reviews yet.